 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CFA0207 Vishay Draloric Carbon Film Resistors, Standard FEATURES * Conformal lacquer coating * Stable film structure * Low performance and low cost applications * General purpose commodity products * Compatible with automatic insertion equipment STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE POWER RATING LIMITING ELEMENT P70C W CFA0207 * Coating: beige 0207 0.33 VOLTAGE MAX V 250 TEMPERATURE COEFFICIENT ppm/K + 350/- 1500 TOLERANCE % 5 RESISTANCE RANGE E-SERIES 1R0 - 10M 24 * Marking: 4 band colour code TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70C Limiting Element Voltage 1) Insulation voltage (1 min) Thermal Resistance Insulation Resistance Category Temperature Range Terminal Strength, axial Failure Rate Weight 1)Rated UNIT W V Veff K/W C N 10 /h g PxR -9 CFA0207 0.33 250 > 500 257 109 - 55/+ 155 > 25 < 10 0.21 voltage: PACKAGING MODEL CFA0207 2)On REEL 2) PIECES/REEL 5000 CODE R5 MIN. ORDER QTY 1 5000 BOX CODE A5 MIN. ORDER QTY PACKAGING UNITS 1 PACKAGING UNITS PIECES/BOX special request only ORDERING INFORMATION CFA0207 MODEL 1K8 RESISTANCE VALUE 5% TOLERANCE % A5 PACKAGING A5-Ammopack 5000 pcs Document Number 21022 Revision 05-Jun-03 For Technical Questions, contact: ff1aresistors@vishay.com www.vishay.com 1 CFA0207 Vishay Draloric DIMENSIONS 6 mm* L1 L D d Carbon Film Resistors, Standard MODEL D max CFA0207 2.5 DIMENSIONS [in millimeters] L max 6.5 L1 max 7.5 B 53 1 d 0.6 e 7.5 * Taping in accordance with IEC60286-1 * D and L measured in accordance with IEC60294 * d in accordance with IEC60301 e B Rated Power (%) Temperature rise (C) 150 120 100 80 60 100 50 40 20 0 0 0.2 0.4 0.6 0.8 Power (W) 0 -55 -25 0 25 50 75 70 100 125 155 TEMPERATURE RISE PERFORMANCE TEST Endurance Test at 70C IEC 60115-1 4.25.1 Endurance at UCT IEC 60115-1 4.25.3 Overload Test IEC 60115-1 4.13 Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Climatic Sequence IEC 60115-1 4.23 Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 Robustness of Terminations IEC 60115-1 4.16 Vibration IEC 60115-1 4.22 1) DERATING Ambient Temperature (C) CONDITIONS OF TEST 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 1000 hours at 155C without load Short time overload 5s at 2.5 x rated voltage or twice the limiting element voltage Rapid change between upper and lower category temperature Dry heat, damp heat cyclic, cold, low air pressure 56 days at 40C and 93% relative humidity 10 seconds at 260C solder bath temperature Tensile, bending and torsion 0.75mm or 10g, 10Hz - 500Hz 6 hours REQUIREMENTS 1) 3.0% 3.0% 0.75% 0.5% 1.5% 3.0% 1.0% 0.25% 0.25% For ohmic values between 10R and 1M APPLICABLE SPECIFICATIONS CECC40000/40100/EN 140000/IEC 60115-1 www.vishay.com 2 For Technical Questions, contact: ff1aresistors@vishay.com Document Number 21022 Revision 05-Jun-03 |
Price & Availability of CFA0207
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |